We focus on the manufacturing of Led module/led strip/led neon/led plant growth light.
English
Products
You are here: Home / Products / LED LIGHT / DC12V/24V 2835SMD 8000k Cold White Led Flexible Strip
Share to:

DC12V/24V 2835SMD 8000k Cold White Led Flexible Strip

Introduction:

1.DC12V, 60leds strip 4.8w, no waterproof used for inside
2.5meters/roll or 50meters one roll as clinets request
3,use high brightness 22-24Lumen led
4,easy to installing
  • HY-2835-60LEDS
  • DC12V
  • 4.8w
  • white/red/green/blue
  • IP20
  • 3years
  • 120Degree
Availability:
Quantity:

1. Installation method of flexible light bar


1. Tear 3M glue

There is a self-adhesive 3M double-sided adhesive on the back of each LED flexible light bar, which can be torn off directly when installing, and then fix the light bar in the installation position and stick it tightly by hand.


2. Cut the length of the LED strip at will

As for some places that need to be turned or the length of the LED light bar is inconsistent. The circuit structure of the LED light bar is composed of 3 LEDs in series and parallel, and each 3 LEDs can be welded or cut at will.


3. Fixing of flexible light bar

If it is installed outdoors, it will be easily affected by the outside world, which will affect its use. Over time, the decrease of 3M adhesive will cause the LED light bar to fall off, so fix it with a card slot. The place that needs to be connected and cut is the same as the indoor installation method, only need to be equipped with waterproof glue to strengthen the waterproof effect of the connection point.


4. Power supply for flexible light bar

The general voltage of the LED flexible light bar is DC 12V, so a switching power supply is required. The size of the power supply is calculated according to the length and power of the LED flexible light bar. You can also buy a high-power switching power supply as the main power supply, and connect all the LED flexible light bar input power in parallel, and the main switching power supply is used to supply power.


5. Use amplifier for LED flexible light bar

If the connection distance of the LED light bar is long, and the controller cannot control that long light bar, it is necessary to use a power amplifier for tapping.


colors:

2835 颜色


2835接线图1

英文版接线a

question&answers:


Q: Which led chips are used in this type module?

A: 22Lumen  SMD2835 used for this type


Q:What Controller  for this type strip?

A:very single color


Q:How many quantities module in one Roll?

A:5meters/15meters/50meters


Q:How long can i get the sample?

A: need 3-5days to send sample.


Q: Do you have MOQ limit for order ?

A:Not limit the MOQ. just depend on clients demand.








 
Shenzhen Huayang Lighting Technology Co., Ltd. is a professional manufacturer of LED modules, LED lights.

  EMAIL: lisajiangled@163.com.
  PHONE: +86-15811829234

Huayang Lighting

Copyright © Shenzhen Huayang Lighting Technology Co., Ltd /  Sitemap / Supported By Leadong